3500/22M specifications:
Input signal: The input signal range is -10 Vdc to+10 Vdc. Supports multiple signal types, including current, voltage, displacement, velocity, and acceleration.
Power consumption: 7.7
Watt shaft power supply: -14 Vdc
Communication port: RS222 serial communication, maximum 10 Base-T/100
Communication capability: The front panel supports RS232 serial communication up to 115.2 kbaud. Running in a 10 Base-T/100 Mbps Ethernet environment.
Dimensions: Dimensions are 9.50 x 4.60 x 1.00 inches.
Power supply: The shaft power supply is -24 Vdc.
Compatibility: The module is the interface between the 3500 monitoring system and the GE System 1 * mechanical management software.
3500/22M Function:
Data Interface: This module is the interface between the 3500 monitoring system and compatible software such as System1 status monitoring and diagnostic software and 3500 system configuration software.
Combining RIM and Communication Processor: TDI combines the functionality of the 3500/20 Framework Interface Module (RIM) with the data collection capabilities of communication processors such as TDXnet.
Data collection: It can continuously collect steady-state and transient waveform data, and transmit these data to the host software through Ethernet.
Triple Module Redundancy (TMR): For applications that require triple module redundancy configuration, the 3500 system requires TDI in the form of TMR. This module has a “monitor channel comparison function”, which can continuously compare the outputs of three redundant monitors. If it detects that the output information of one monitor is not equal to the other two monitors (within the configured percentage), it will issue an error indication to the monitor.
3500/22M installation location:
The TDI module is installed in the RIM slot of the framework interface module, located in the first slot of the framework (adjacent to the power module).
Integrated Communication Processor: The communication processor function is integrated within the 3500 rack, improving the efficiency of data processing and transmission.
Non critical monitoring path: Although it provides some common functions for the entire rack, it is not a critical monitoring path and has no impact on the normal operation of the entire monitoring system for automatic mechanical protection.
Slot location: Each 3500 rack requires one TDI or RIM, always occupying slot 1 (next to the power supply).